Windows 10 IoT

Moderators: Mike Gooch, Jon Rogan, Ankit, Michael Morris

Post Reply
SCRS
Posts: 3
Joined: Tue Jan 15, 2019 9:07 am

Windows 10 IoT

Post by SCRS »

Has anyone else had issues with touch running very very slow on Windows 10. I mainly use the YCR Titan range terminals and since moving over to Windows 10 I have had nothing but performance problems.

Regards

Scott
LCR Warren
Posts: 1
Joined: Tue Nov 27, 2018 4:39 pm

Re: Windows 10 IoT

Post by LCR Warren »

We sell a lot of Titans and put CES on them , we have no major issue except with the touch drivers - this can appear to make the system slow. If you play around with the sensitivity of the touch panel you can get CES running a dream.
SCRS
Posts: 3
Joined: Tue Jan 15, 2019 9:07 am

Re: Windows 10 IoT

Post by SCRS »

Hi Warren,

Thanks for the info on this and I am now looking forward to having a play around to see if I can get it running correctly. I have reverted all the Titans out in the field back to Pos Ready 7 because of the issues I was having.

Thanks again for your help :D
SCRS
Posts: 3
Joined: Tue Jan 15, 2019 9:07 am

Re: Windows 10 IoT

Post by SCRS »

Hi Warren,

Have you ever had Touch running on the hisense tablet's from YCR ? Again they are windows 10 and I seem to get the same issues on that.

Regards

Scott
Post Reply