Has anyone else had issues with touch running very very slow on Windows 10. I mainly use the YCR Titan range terminals and since moving over to Windows 10 I have had nothing but performance problems.
Regards
Scott
Windows 10 IoT
Moderators: Mike Gooch, Jon Rogan, Ankit, Michael Morris
-
- Posts: 1
- Joined: Tue Nov 27, 2018 4:39 pm
Re: Windows 10 IoT
We sell a lot of Titans and put CES on them , we have no major issue except with the touch drivers - this can appear to make the system slow. If you play around with the sensitivity of the touch panel you can get CES running a dream.
Re: Windows 10 IoT
Hi Warren,
Thanks for the info on this and I am now looking forward to having a play around to see if I can get it running correctly. I have reverted all the Titans out in the field back to Pos Ready 7 because of the issues I was having.
Thanks again for your help
Thanks for the info on this and I am now looking forward to having a play around to see if I can get it running correctly. I have reverted all the Titans out in the field back to Pos Ready 7 because of the issues I was having.
Thanks again for your help
Re: Windows 10 IoT
Hi Warren,
Have you ever had Touch running on the hisense tablet's from YCR ? Again they are windows 10 and I seem to get the same issues on that.
Regards
Scott
Have you ever had Touch running on the hisense tablet's from YCR ? Again they are windows 10 and I seem to get the same issues on that.
Regards
Scott